WandererAstro Wanderer Cover V4-EC 150mm
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
WandererAstro WandererCover Review
WandererCover V4EC - professional lightweight motorized flat panel
Added 12V DC input port, indicator light, and soft pads to protect the lens barrel.
(Note: 12V power supply is required)
The built-in encoder provides real-time and accurate feedback on the position of the cover, allowing users to know the angle of the cover without relying on a monitor camera. Repeatable positioning accuracy is higher than ±0.25 degrees.
Brand new motor adopted, the payload is increased by more than 50%, ensuring its durability and preventing gearbox damage. After testing, the life of WandererCover V4-EC exceeds 3,000 opening and closing cycles.
In humid areas, dew will occur on the flat panel at night. If the dew does not evaporate in time, it will easily make the inside of the telescope moist after closing the cover, which may cause the lens to become damp and moldy in the long term.
The V4-EC has built-in heating elements to keep the cover dry all night or quickly evaporate dew in the morning. The dew heater can be controlled in NINA advanced sequence using the plugin "Device Actions and Commands".
Thanks to the encoder, V4-EC provides automatic detection of the open and closed position*. If your device is not around and manual setting is not possible, WandererCover can automatically detect obstacles and set the open and closed position.
*It is always recommended to set the open and closed angles manually! Use automatic detection as the last option only when the flat panel angle cannot be observed. It is normal for the motorbox to heat up during automatic detection. The angle detected is affected by many factors and success is not guaranteed. Do not try multiple times if unsuccessful.
The new ASCOM driver makes use easier. The All-in-one driver will automatically identify the device model and connect. It also supports automatic or manual port selection and connection of up to 6 devices simultaneously. The control interface has also been optimized and is now more beautiful.
The new dimming controller increases the PWM dimming frequency by 100% to further avoid bandings. 255 levels of dimming meet the needs of flat-field shooting in most situations.
Specifications
- Luminous diameter (mm): 150
- Weight (g): 365
- Outer diameter (mm): 175
- Heating Power (W): 9
- USB: 2.0 Type-B
- Power: 12V 2A DC5.5*2.1mm
Please note: WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A. With the latest software update (be sure to download the latest version from our ‘Links and Downloads’ section on this page), in addition to ASCOM and INDI compatibility, WandererAstro also supports control via ZWO ASIAIR Plus, ToupTek StellaVita, and any device capable of operating a DC switch.
Other Information
- Country of Manufacture: China
- Wanderer Astro: Two-year factory limited warranty.
WandererAstro WandererCover Review
WandererCover V4EC - professional lightweight motorized flat panel
Added 12V DC input port, indicator light, and soft pads to protect the lens barrel.
(Note: 12V power supply is required)
The built-in encoder provides real-time and accurate feedback on the position of the cover, allowing users to know the angle of the cover without relying on a monitor camera. Repeatable positioning accuracy is higher than ±0.25 degrees.
Brand new motor adopted, the payload is increased by more than 50%, ensuring its durability and preventing gearbox damage. After testing, the life of WandererCover V4-EC exceeds 3,000 opening and closing cycles.
In humid areas, dew will occur on the flat panel at night. If the dew does not evaporate in time, it will easily make the inside of the telescope moist after closing the cover, which may cause the lens to become damp and moldy in the long term.
The V4-EC has built-in heating elements to keep the cover dry all night or quickly evaporate dew in the morning. The dew heater can be controlled in NINA advanced sequence using the plugin "Device Actions and Commands".
Thanks to the encoder, V4-EC provides automatic detection of the open and closed position*. If your device is not around and manual setting is not possible, WandererCover can automatically detect obstacles and set the open and closed position.
*It is always recommended to set the open and closed angles manually! Use automatic detection as the last option only when the flat panel angle cannot be observed. It is normal for the motorbox to heat up during automatic detection. The angle detected is affected by many factors and success is not guaranteed. Do not try multiple times if unsuccessful.
The new ASCOM driver makes use easier. The All-in-one driver will automatically identify the device model and connect. It also supports automatic or manual port selection and connection of up to 6 devices simultaneously. The control interface has also been optimized and is now more beautiful.
The new dimming controller increases the PWM dimming frequency by 100% to further avoid bandings. 255 levels of dimming meet the needs of flat-field shooting in most situations.
Specifications
- Luminous diameter (mm): 150
- Weight (g): 365
- Outer diameter (mm): 175
- Heating Power (W): 9
- USB: 2.0 Type-B
- Power: 12V 2A DC5.5*2.1mm
Please note: WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A. With the latest software update (be sure to download the latest version from our ‘Links and Downloads’ section on this page), in addition to ASCOM and INDI compatibility, WandererAstro also supports control via ZWO ASIAIR Plus, ToupTek StellaVita, and any device capable of operating a DC switch.
- 1x WandererCover V4-EC 150mm
- 1x USB2.0 cable (1m)
- 1x DC5521 male to male power cable (1m)
- 4x Nylon cable ties
WandererAstro WandererCover Review
WandererCover V4EC - professional lightweight motorized flat panel
Added 12V DC input port, indicator light, and soft pads to protect the lens barrel.
(Note: 12V power supply is required)
The built-in encoder provides real-time and accurate feedback on the position of the cover, allowing users to know the angle of the cover without relying on a monitor camera. Repeatable positioning accuracy is higher than ±0.25 degrees.
Brand new motor adopted, the payload is increased by more than 50%, ensuring its durability and preventing gearbox damage. After testing, the life of WandererCover V4-EC exceeds 3,000 opening and closing cycles.
In humid areas, dew will occur on the flat panel at night. If the dew does not evaporate in time, it will easily make the inside of the telescope moist after closing the cover, which may cause the lens to become damp and moldy in the long term.
The V4-EC has built-in heating elements to keep the cover dry all night or quickly evaporate dew in the morning. The dew heater can be controlled in NINA advanced sequence using the plugin "Device Actions and Commands".
Thanks to the encoder, V4-EC provides automatic detection of the open and closed position*. If your device is not around and manual setting is not possible, WandererCover can automatically detect obstacles and set the open and closed position.
*It is always recommended to set the open and closed angles manually! Use automatic detection as the last option only when the flat panel angle cannot be observed. It is normal for the motorbox to heat up during automatic detection. The angle detected is affected by many factors and success is not guaranteed. Do not try multiple times if unsuccessful.
The new ASCOM driver makes use easier. The All-in-one driver will automatically identify the device model and connect. It also supports automatic or manual port selection and connection of up to 6 devices simultaneously. The control interface has also been optimized and is now more beautiful.
The new dimming controller increases the PWM dimming frequency by 100% to further avoid bandings. 255 levels of dimming meet the needs of flat-field shooting in most situations.
Specifications
- Luminous diameter (mm): 150
- Weight (g): 365
- Outer diameter (mm): 175
- Heating Power (W): 9
- USB: 2.0 Type-B
- Power: 12V 2A DC5.5*2.1mm
Please note: WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A. With the latest software update (be sure to download the latest version from our ‘Links and Downloads’ section on this page), in addition to ASCOM and INDI compatibility, WandererAstro also supports control via ZWO ASIAIR Plus, ToupTek StellaVita, and any device capable of operating a DC switch.
Other Information
- Country of Manufacture: China
- Wanderer Astro: Two-year factory limited warranty.
| Product Status | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
- 1x WandererCover V4-EC 150mm
- 1x USB2.0 cable (1m)
- 1x DC5521 male to male power cable (1m)
- 4x Nylon cable ties
WandererAstro Wanderer Cover V4-EC 150mm