Sky-Watcher Star Adventurer GTi GoTo Mount with Tripod and Pier Extension
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
- Full GoTo performance in a portable Star Adventurer mount
- Lightweight equatorial mount for deep space, widefield, and nightscape astrophotography
- 11-pound payload capacity
- Multiple pre-programmed tracking rates including sidereal, solar, and lunar
- Interfaces: USB, autoguider (ST4), SynScan hand controller, and a SNAP port for DSLR shutter control programmable via free SynScan Pro app
- Control with your smartphone via Wi-Fi or with the optional SynScan hand box
- Built-in illuminated polar scope for precise alignment
- Dual counterweight positions for use at low latitudes
- Powered by eight AA batteries (not included) or external source via 2.1 DC 12v port
- V-style dovetail
- Lifetime free firmware upgrades
- 3/8-inch tripod mount
- Star Adventurer GTi steel tripod and pier extension included
- Optional shutter release cable and ball head adapter
Since its introduction in 2014, the Star Adventurer has been at the forefront of the lightweight, portable astroimaging revolution. And now, with the Star Adventurer GTi, we take the next step with full GoTo performance in a compact package.
The all-new Star Adventurer GTi features a built-in illuminated polar scope for precision alignment in EQ mode, ports for USB, autoguider, V-style dovetail, optional SynScan hand controller, and SNAP shutter control for your DSLR (programmable via Sky-Watcher’s free SynScan Pro app for iOS and Android). Star Adventurer GTi also includes a dual-position counterweight for use at low latitudes as well as full smartphone control via Wi-Fi.
With the added GoTo feature plus multiple tracking rates including lunar, solar, and sidereal, the heavens are yours to capture and explore.
With its 11-pound payload capacity, Star Adventurer is well-equipped to handle your DLSR or mirrorless camera sporting a wide-angle or telephoto lens plus accessories, a small aperture astrograph with a dedicated astro camera, or even small OTA’s such as our Skymax series of Maksutov-Cassegrain telescopes perfect for deep space objects, the Moon, and planets.
Available in two configurations (with or without tripod and pier extension), Star Adventurer GTi is the perfect mount for the astrophotographer that wants the ultimate in both performance and portability.
Specifications:
SKU: S20595 - this version includes the tripod and pier extension. For the head kit only, please see item # S20590.
General Mount Info:
- Mount Type: Equatorial
- Mount instrument capacity: 11 lbs.
- Mount head size: 227mm x 227mm x 125mm
- Tripod mounting thread: 3/8
- Mounting saddle type: V-style
- Counterweight bar included: Yes
- Counterweight bar retractable?: Yes, thread-on
- Counterweight bar length and diameter: 213mm and 20mm
- Type of motor: Mini-DC Servo
- Drive type: Gear
- Mount head weight: 8lbs
- Illuminated Polarscope?: Yes
- Tracking Modes: Sidereal, Solar, Lunar
- Latitude range: 0-70 degrees
Computer/Drive System Info:
- GoTo: Yes
- Hand controller port: Yes
- Guide port: Yes
- SNAP port: Yes
- PC connect USB port: Yes
- Cable management: No
- Built-in GPS: No
- Built-in WiFi: Yes
- Hand controller: No
- Power requirements: 12 volt
- Internal battery pack: Yes (8x AAs)
- Mount power port size and style: 2.1mm female
Included Accessories:
- Counter weight: 5 lbs (2.26kg)
- Polarscope: Yes (installed and aligned)
- Tripod: Yes
- Tripod Heights (Retracted/Extended): 26.75"/44.5" (68cm/113cm)
- Tripod Weights: 5.5 lbs (2.49kg)
- Pier Extension: Yes
- Pier Extension height: 8.5" (21.6cm)
- Power cable: No
- PC link cable: Yes
- SNAP cable: No
- Hand controller holder: No
- Manual: Yes
- Case: No
- Shipping weight: 30 lbs (13.6kg)
- Shipping dimensions: 44"x13"x9"
Other Information
- Country of Manufacture: China
Since its introduction in 2014, the Star Adventurer has been at the forefront of the lightweight, portable astroimaging revolution. And now, with the Star Adventurer GTi, we take the next step with full GoTo performance in a compact package.
The all-new Star Adventurer GTi features a built-in illuminated polar scope for precision alignment in EQ mode, ports for USB, autoguider, V-style dovetail, optional SynScan hand controller, and SNAP shutter control for your DSLR (programmable via Sky-Watcher’s free SynScan Pro app for iOS and Android). Star Adventurer GTi also includes a dual-position counterweight for use at low latitudes as well as full smartphone control via Wi-Fi.
With the added GoTo feature plus multiple tracking rates including lunar, solar, and sidereal, the heavens are yours to capture and explore.
With its 11-pound payload capacity, Star Adventurer is well-equipped to handle your DLSR or mirrorless camera sporting a wide-angle or telephoto lens plus accessories, a small aperture astrograph with a dedicated astro camera, or even small OTA’s such as our Skymax series of Maksutov-Cassegrain telescopes perfect for deep space objects, the Moon, and planets.
Available in two configurations (with or without tripod and pier extension), Star Adventurer GTi is the perfect mount for the astrophotographer that wants the ultimate in both performance and portability.
Specifications:
SKU: S20595 - this version includes the tripod and pier extension. For the head kit only, please see item # S20590.
General Mount Info:
- Mount Type: Equatorial
- Mount instrument capacity: 11 lbs.
- Mount head size: 227mm x 227mm x 125mm
- Tripod mounting thread: 3/8
- Mounting saddle type: V-style
- Counterweight bar included: Yes
- Counterweight bar retractable?: Yes, thread-on
- Counterweight bar length and diameter: 213mm and 20mm
- Type of motor: Mini-DC Servo
- Drive type: Gear
- Mount head weight: 8lbs
- Illuminated Polarscope?: Yes
- Tracking Modes: Sidereal, Solar, Lunar
- Latitude range: 0-70 degrees
Computer/Drive System Info:
- GoTo: Yes
- Hand controller port: Yes
- Guide port: Yes
- SNAP port: Yes
- PC connect USB port: Yes
- Cable management: No
- Built-in GPS: No
- Built-in WiFi: Yes
- Hand controller: No
- Power requirements: 12 volt
- Internal battery pack: Yes (8x AAs)
- Mount power port size and style: 2.1mm female
Included Accessories:
- Counter weight: 5 lbs (2.26kg)
- Polarscope: Yes (installed and aligned)
- Tripod: Yes
- Tripod Heights (Retracted/Extended): 26.75"/44.5" (68cm/113cm)
- Tripod Weights: 5.5 lbs (2.49kg)
- Pier Extension: Yes
- Pier Extension height: 8.5" (21.6cm)
- Power cable: No
- PC link cable: Yes
- SNAP cable: No
- Hand controller holder: No
- Manual: Yes
- Case: No
- Shipping weight: 30 lbs (13.6kg)
- Shipping dimensions: 44"x13"x9"
- Star Adventurer GTi mount head
- Star Adventurer GTi tripod
- Pier Extension
- Accessory Tray
- AA battery packs (installed in the mount)
- USB-B cable
- SNAP cable
- Counterweight bar
- Counterweight bar mounting adapter
- Two counterweights: 3.5 lbs & 1.5 lbs
- Toe saver
- Full GoTo performance in a portable Star Adventurer mount
- Lightweight equatorial mount for deep space, widefield, and nightscape astrophotography
- 11-pound payload capacity
- Multiple pre-programmed tracking rates including sidereal, solar, and lunar
- Interfaces: USB, autoguider (ST4), SynScan hand controller, and a SNAP port for DSLR shutter control programmable via free SynScan Pro app
- Control with your smartphone via Wi-Fi or with the optional SynScan hand box
- Built-in illuminated polar scope for precise alignment
- Dual counterweight positions for use at low latitudes
- Powered by eight AA batteries (not included) or external source via 2.1 DC 12v port
- V-style dovetail
- Lifetime free firmware upgrades
- 3/8-inch tripod mount
- Star Adventurer GTi steel tripod and pier extension included
- Optional shutter release cable and ball head adapter
Since its introduction in 2014, the Star Adventurer has been at the forefront of the lightweight, portable astroimaging revolution. And now, with the Star Adventurer GTi, we take the next step with full GoTo performance in a compact package.
The all-new Star Adventurer GTi features a built-in illuminated polar scope for precision alignment in EQ mode, ports for USB, autoguider, V-style dovetail, optional SynScan hand controller, and SNAP shutter control for your DSLR (programmable via Sky-Watcher’s free SynScan Pro app for iOS and Android). Star Adventurer GTi also includes a dual-position counterweight for use at low latitudes as well as full smartphone control via Wi-Fi.
With the added GoTo feature plus multiple tracking rates including lunar, solar, and sidereal, the heavens are yours to capture and explore.
With its 11-pound payload capacity, Star Adventurer is well-equipped to handle your DLSR or mirrorless camera sporting a wide-angle or telephoto lens plus accessories, a small aperture astrograph with a dedicated astro camera, or even small OTA’s such as our Skymax series of Maksutov-Cassegrain telescopes perfect for deep space objects, the Moon, and planets.
Available in two configurations (with or without tripod and pier extension), Star Adventurer GTi is the perfect mount for the astrophotographer that wants the ultimate in both performance and portability.
Specifications:
SKU: S20595 - this version includes the tripod and pier extension. For the head kit only, please see item # S20590.
General Mount Info:
- Mount Type: Equatorial
- Mount instrument capacity: 11 lbs.
- Mount head size: 227mm x 227mm x 125mm
- Tripod mounting thread: 3/8
- Mounting saddle type: V-style
- Counterweight bar included: Yes
- Counterweight bar retractable?: Yes, thread-on
- Counterweight bar length and diameter: 213mm and 20mm
- Type of motor: Mini-DC Servo
- Drive type: Gear
- Mount head weight: 8lbs
- Illuminated Polarscope?: Yes
- Tracking Modes: Sidereal, Solar, Lunar
- Latitude range: 0-70 degrees
Computer/Drive System Info:
- GoTo: Yes
- Hand controller port: Yes
- Guide port: Yes
- SNAP port: Yes
- PC connect USB port: Yes
- Cable management: No
- Built-in GPS: No
- Built-in WiFi: Yes
- Hand controller: No
- Power requirements: 12 volt
- Internal battery pack: Yes (8x AAs)
- Mount power port size and style: 2.1mm female
Included Accessories:
- Counter weight: 5 lbs (2.26kg)
- Polarscope: Yes (installed and aligned)
- Tripod: Yes
- Tripod Heights (Retracted/Extended): 26.75"/44.5" (68cm/113cm)
- Tripod Weights: 5.5 lbs (2.49kg)
- Pier Extension: Yes
- Pier Extension height: 8.5" (21.6cm)
- Power cable: No
- PC link cable: Yes
- SNAP cable: No
- Hand controller holder: No
- Manual: Yes
- Case: No
- Shipping weight: 30 lbs (13.6kg)
- Shipping dimensions: 44"x13"x9"
Other Information
- Country of Manufacture: China
| Product Status | sale |
|---|---|
| Free Shipping Graphic | Free Contiguous US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
- Star Adventurer GTi mount head
- Star Adventurer GTi tripod
- Pier Extension
- Accessory Tray
- AA battery packs (installed in the mount)
- USB-B cable
- SNAP cable
- Counterweight bar
- Counterweight bar mounting adapter
- Two counterweights: 3.5 lbs & 1.5 lbs
- Toe saver
Sky-Watcher Star Adventurer GTi GoTo Mount with Tripod and Pier Extension