Rigel Systems QuikFinder
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
Perfect for binoculars & small and large telescopes; Makes starhopping easy; Pulsed reticle.
- One tenth the size and weight of the competition's "reflex" sight, makes aiming your telescope easy with its wide-open right-side-up view.
- Projects 1/2 and 2 degree red circles onto the night sky in focus with the stars - what you see in the red circles is what you get in your telescope.
- Pulsed or continuous illumination of reticle - at your behest. A standard feature on QuikFinder, a $20 option on the "competition's" reflex sight.
- Compact design - Lets you use both eyes to see fainter than with the competition's "reflex" sight.
- Two baseplates - Lets you use it on two telescopes. Easy clip-on/clip-off mounting to baseplate (no screws to fumble with). Baseplate attaches to telescope tube with double-sided tape (included).
Features:
- Rugged construction, an ultra-efficient LED and lithium battery (included) for long life.
- QuikFinder attaches without drilling and is easily removed from its baseplate for storage. Additional baseplates are available for using QuikFinder on more than one telescope.
- Baseplate is 2.5 inches long, 2 inches wide and 1/2 inch high.
- QuikFinder is 4.5 inches tall, 1.4 inches square.
Is your QuikFinder DOA or not working upon arrival?
We inspect each and every Rigel QuikFinder upon receipt from the company. We test to make sure that it lights up and that the reticle pattern is roughly centered. If you receive a unit that does not seem to be working, please perform the following steps before contacting us for a replacement.
1. First, make sure that you are looking at the finder from the correct side! Hold the QuikFinder up close to your eye with the knobs AWAY from you and look into the side just above the molded-in word QuikFinder. You'd be surprised by how many people do not check both sides before reporting a problem.
Next, make sure that you are placing your eye right behind the Rigel Quikfinder. Many people place their eye at a distance (as in the Telrad) and can't see the reticle pattern.
2. Still doesn't work? Here's how to check the included batteries before you try to replace them. This is best done at night or in a dark room.
- Remove the QuikFinder from its base plate and insert the button battery small end first (the + sign should be visible).
- Turn the small white knob on the front all the way counter-clockwise.
- Turn the black knob all the way clockwise.
- Looking at the bottom of the circuit board, do you see a red glow? If you do, this confirms that the LED and battery are working. In this case, if you do not see the reticle pattern, it may have moved off-center during shipping and simply needs to be adjusted and brought back to the center using the three centering knobs.
If you've tried the above as well as a fresh set of batteries, and if the finder still does not work, please let us know.
Other Information
- Country of Manufacture: United States
Perfect for binoculars & small and large telescopes; Makes starhopping easy; Pulsed reticle.
- One tenth the size and weight of the competition's "reflex" sight, makes aiming your telescope easy with its wide-open right-side-up view.
- Projects 1/2 and 2 degree red circles onto the night sky in focus with the stars - what you see in the red circles is what you get in your telescope.
- Pulsed or continuous illumination of reticle - at your behest. A standard feature on QuikFinder, a $20 option on the "competition's" reflex sight.
- Compact design - Lets you use both eyes to see fainter than with the competition's "reflex" sight.
- Two baseplates - Lets you use it on two telescopes. Easy clip-on/clip-off mounting to baseplate (no screws to fumble with). Baseplate attaches to telescope tube with double-sided tape (included).
Features:
- Rugged construction, an ultra-efficient LED and lithium battery (included) for long life.
- QuikFinder attaches without drilling and is easily removed from its baseplate for storage. Additional baseplates are available for using QuikFinder on more than one telescope.
- Baseplate is 2.5 inches long, 2 inches wide and 1/2 inch high.
- QuikFinder is 4.5 inches tall, 1.4 inches square.
Is your QuikFinder DOA or not working upon arrival?
We inspect each and every Rigel QuikFinder upon receipt from the company. We test to make sure that it lights up and that the reticle pattern is roughly centered. If you receive a unit that does not seem to be working, please perform the following steps before contacting us for a replacement.
1. First, make sure that you are looking at the finder from the correct side! Hold the QuikFinder up close to your eye with the knobs AWAY from you and look into the side just above the molded-in word QuikFinder. You'd be surprised by how many people do not check both sides before reporting a problem.
Next, make sure that you are placing your eye right behind the Rigel Quikfinder. Many people place their eye at a distance (as in the Telrad) and can't see the reticle pattern.
2. Still doesn't work? Here's how to check the included batteries before you try to replace them. This is best done at night or in a dark room.
- Remove the QuikFinder from its base plate and insert the button battery small end first (the + sign should be visible).
- Turn the small white knob on the front all the way counter-clockwise.
- Turn the black knob all the way clockwise.
- Looking at the bottom of the circuit board, do you see a red glow? If you do, this confirms that the LED and battery are working. In this case, if you do not see the reticle pattern, it may have moved off-center during shipping and simply needs to be adjusted and brought back to the center using the three centering knobs.
If you've tried the above as well as a fresh set of batteries, and if the finder still does not work, please let us know.
Perfect for binoculars & small and large telescopes; Makes starhopping easy; Pulsed reticle.
- One tenth the size and weight of the competition's "reflex" sight, makes aiming your telescope easy with its wide-open right-side-up view.
- Projects 1/2 and 2 degree red circles onto the night sky in focus with the stars - what you see in the red circles is what you get in your telescope.
- Pulsed or continuous illumination of reticle - at your behest. A standard feature on QuikFinder, a $20 option on the "competition's" reflex sight.
- Compact design - Lets you use both eyes to see fainter than with the competition's "reflex" sight.
- Two baseplates - Lets you use it on two telescopes. Easy clip-on/clip-off mounting to baseplate (no screws to fumble with). Baseplate attaches to telescope tube with double-sided tape (included).
Features:
- Rugged construction, an ultra-efficient LED and lithium battery (included) for long life.
- QuikFinder attaches without drilling and is easily removed from its baseplate for storage. Additional baseplates are available for using QuikFinder on more than one telescope.
- Baseplate is 2.5 inches long, 2 inches wide and 1/2 inch high.
- QuikFinder is 4.5 inches tall, 1.4 inches square.
Is your QuikFinder DOA or not working upon arrival?
We inspect each and every Rigel QuikFinder upon receipt from the company. We test to make sure that it lights up and that the reticle pattern is roughly centered. If you receive a unit that does not seem to be working, please perform the following steps before contacting us for a replacement.
1. First, make sure that you are looking at the finder from the correct side! Hold the QuikFinder up close to your eye with the knobs AWAY from you and look into the side just above the molded-in word QuikFinder. You'd be surprised by how many people do not check both sides before reporting a problem.
Next, make sure that you are placing your eye right behind the Rigel Quikfinder. Many people place their eye at a distance (as in the Telrad) and can't see the reticle pattern.
2. Still doesn't work? Here's how to check the included batteries before you try to replace them. This is best done at night or in a dark room.
- Remove the QuikFinder from its base plate and insert the button battery small end first (the + sign should be visible).
- Turn the small white knob on the front all the way counter-clockwise.
- Turn the black knob all the way clockwise.
- Looking at the bottom of the circuit board, do you see a red glow? If you do, this confirms that the LED and battery are working. In this case, if you do not see the reticle pattern, it may have moved off-center during shipping and simply needs to be adjusted and brought back to the center using the three centering knobs.
If you've tried the above as well as a fresh set of batteries, and if the finder still does not work, please let us know.
Other Information
- Country of Manufacture: United States
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Rigel Systems QuikFinder