OGMA Z'Tilter Back Focus & Tilt Adjuster for ZWO ASI2600 Series (Star-Spangled Edition)
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
Designed and manufactured by OGMA, the Z’Tilter is a cutting-edge solution for fine-tuning back focus and correcting optical tilt on the ZWO ASI2600 camera series.
Unlike traditional tilt adjusters that consume valuable back-focus, the Z’Tilter preserves your imaging train's spacing, ensuring seamless integration with your setup. Its rear-facing adjustment screws allow for precise tweaks without interference from front-mounted accessories, making tilt correction more convenient than ever.
A ZWO ASI2600 camera with the Z'Tilter installed will continue having the original back focus distance of 17.5 mm.
The tilt-adjusting screws can be conveniently accessed from the rear side of the camera. This is an advantage over the default front-facing tilt solution included with the camera.
The Z'Tilter can be configured to work with either three or four pairs of pull-push screws.
The Z'Tilter is compatible only with ZWO cameras of the ASI2600 series. This product is incompatible with other camera brands and models.
Z'Tilter Installation
Disclaimer
The Z'Tilter is designed to replace your camera's original front flange. Please note that the camera manufacturer may void the warranty if informed about the use of this modification. If you choose to install this product, we strongly recommend reading the instructions and watching the video tutorial to ensure proper installation. OGMAVision assumes no responsibility for any damage to your camera or changes to its warranty status resulting from the installation or use of this product.
For your convenience, we recommend keeping the original front flange in case you need to reinstall it in the future.
Other Information
- Country of Manufacture: China
Designed and manufactured by OGMA, the Z’Tilter is a cutting-edge solution for fine-tuning back focus and correcting optical tilt on the ZWO ASI2600 camera series.
Unlike traditional tilt adjusters that consume valuable back-focus, the Z’Tilter preserves your imaging train's spacing, ensuring seamless integration with your setup. Its rear-facing adjustment screws allow for precise tweaks without interference from front-mounted accessories, making tilt correction more convenient than ever.
A ZWO ASI2600 camera with the Z'Tilter installed will continue having the original back focus distance of 17.5 mm.
The tilt-adjusting screws can be conveniently accessed from the rear side of the camera. This is an advantage over the default front-facing tilt solution included with the camera.
The Z'Tilter can be configured to work with either three or four pairs of pull-push screws.
The Z'Tilter is compatible only with ZWO cameras of the ASI2600 series. This product is incompatible with other camera brands and models.
Z'Tilter Installation
Disclaimer
The Z'Tilter is designed to replace your camera's original front flange. Please note that the camera manufacturer may void the warranty if informed about the use of this modification. If you choose to install this product, we strongly recommend reading the instructions and watching the video tutorial to ensure proper installation. OGMAVision assumes no responsibility for any damage to your camera or changes to its warranty status resulting from the installation or use of this product.
For your convenience, we recommend keeping the original front flange in case you need to reinstall it in the future.
Designed and manufactured by OGMA, the Z’Tilter is a cutting-edge solution for fine-tuning back focus and correcting optical tilt on the ZWO ASI2600 camera series.
Unlike traditional tilt adjusters that consume valuable back-focus, the Z’Tilter preserves your imaging train's spacing, ensuring seamless integration with your setup. Its rear-facing adjustment screws allow for precise tweaks without interference from front-mounted accessories, making tilt correction more convenient than ever.
A ZWO ASI2600 camera with the Z'Tilter installed will continue having the original back focus distance of 17.5 mm.
The tilt-adjusting screws can be conveniently accessed from the rear side of the camera. This is an advantage over the default front-facing tilt solution included with the camera.
The Z'Tilter can be configured to work with either three or four pairs of pull-push screws.
The Z'Tilter is compatible only with ZWO cameras of the ASI2600 series. This product is incompatible with other camera brands and models.
Z'Tilter Installation
Disclaimer
The Z'Tilter is designed to replace your camera's original front flange. Please note that the camera manufacturer may void the warranty if informed about the use of this modification. If you choose to install this product, we strongly recommend reading the instructions and watching the video tutorial to ensure proper installation. OGMAVision assumes no responsibility for any damage to your camera or changes to its warranty status resulting from the installation or use of this product.
For your convenience, we recommend keeping the original front flange in case you need to reinstall it in the future.
Other Information
- Country of Manufacture: China
| Product Status | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |