GSO 2" Smooth-Sided Barrel / Nosepiece from 2" GSO Refractor Diagonals & Eyepieces
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
Do you have a 2" GSO SCT diagonal (standard, dielectric or quartz) that you want to use with a refractor but cannot? Here is the solution you need! You can simply unscrew the SCT adapter on the telescope end of your GSO SCT diagonal. Then insert this barrel in its place and you can now use your SCT diagonal in 2" refractor focusers.
Or do you have a GSO 2" SuperView or Kellner eyepiece with the old safety-grooved nosepiece and want to replace it with a smooth-sided nosepiece? Then simply unscrew your original nosepiece from the bottom of the eyepiece body and screw this adapter on instead.
Or do you want to use your Meade/Celestron f/6.3 SCT focal reducer in a 2" holder? Then simply attach this adapter to the reducer to use as a 2" nosepiece.
This adapter has a standard SCT male thread (2", 24 TPI) to connect to the GSO diagonal body on one side. The other (telescope) side has a standard 48mm (M48 x 0.75) female thread so it can accept 2" astronomy filters. The barrel is made of aluminum and the inside is threaded and painted flat black to minimize internal reflections.
This adapter will work with the following GSO items:
- All 2" GSO diagonals
- Some 2" diagonals made by GSO for Celestron, Antares, Burgess, SmartAstronomy, TS (Germany), OPT, and others
- GSO 2" SuperView and Kellner eyepieces
This adapter will not work directly with the following diagonals:
- All William Optics diagonals
- Many other Meade, Celestron, Antares and other diagonals
- Any other non-GSO 2" eyepiece
There is no standardization in the astronomy industry for the threads used on diagonal/eyepiece bodies. Hence, do not assume that this adapter will work with your diagonal or eyepiece - in fact, if it is not GSO-made, it probably won't! Please check the thread on your diagonal/eyepiece body before ordering this item - we do not have compatibility information for all the diagonals/eyepieces out there.
Other Information
- Country of Manufacture: Taiwan
Do you have a 2" GSO SCT diagonal (standard, dielectric or quartz) that you want to use with a refractor but cannot? Here is the solution you need! You can simply unscrew the SCT adapter on the telescope end of your GSO SCT diagonal. Then insert this barrel in its place and you can now use your SCT diagonal in 2" refractor focusers.
Or do you have a GSO 2" SuperView or Kellner eyepiece with the old safety-grooved nosepiece and want to replace it with a smooth-sided nosepiece? Then simply unscrew your original nosepiece from the bottom of the eyepiece body and screw this adapter on instead.
Or do you want to use your Meade/Celestron f/6.3 SCT focal reducer in a 2" holder? Then simply attach this adapter to the reducer to use as a 2" nosepiece.
This adapter has a standard SCT male thread (2", 24 TPI) to connect to the GSO diagonal body on one side. The other (telescope) side has a standard 48mm (M48 x 0.75) female thread so it can accept 2" astronomy filters. The barrel is made of aluminum and the inside is threaded and painted flat black to minimize internal reflections.
This adapter will work with the following GSO items:
- All 2" GSO diagonals
- Some 2" diagonals made by GSO for Celestron, Antares, Burgess, SmartAstronomy, TS (Germany), OPT, and others
- GSO 2" SuperView and Kellner eyepieces
This adapter will not work directly with the following diagonals:
- All William Optics diagonals
- Many other Meade, Celestron, Antares and other diagonals
- Any other non-GSO 2" eyepiece
There is no standardization in the astronomy industry for the threads used on diagonal/eyepiece bodies. Hence, do not assume that this adapter will work with your diagonal or eyepiece - in fact, if it is not GSO-made, it probably won't! Please check the thread on your diagonal/eyepiece body before ordering this item - we do not have compatibility information for all the diagonals/eyepieces out there.
Do you have a 2" GSO SCT diagonal (standard, dielectric or quartz) that you want to use with a refractor but cannot? Here is the solution you need! You can simply unscrew the SCT adapter on the telescope end of your GSO SCT diagonal. Then insert this barrel in its place and you can now use your SCT diagonal in 2" refractor focusers.
Or do you have a GSO 2" SuperView or Kellner eyepiece with the old safety-grooved nosepiece and want to replace it with a smooth-sided nosepiece? Then simply unscrew your original nosepiece from the bottom of the eyepiece body and screw this adapter on instead.
Or do you want to use your Meade/Celestron f/6.3 SCT focal reducer in a 2" holder? Then simply attach this adapter to the reducer to use as a 2" nosepiece.
This adapter has a standard SCT male thread (2", 24 TPI) to connect to the GSO diagonal body on one side. The other (telescope) side has a standard 48mm (M48 x 0.75) female thread so it can accept 2" astronomy filters. The barrel is made of aluminum and the inside is threaded and painted flat black to minimize internal reflections.
This adapter will work with the following GSO items:
- All 2" GSO diagonals
- Some 2" diagonals made by GSO for Celestron, Antares, Burgess, SmartAstronomy, TS (Germany), OPT, and others
- GSO 2" SuperView and Kellner eyepieces
This adapter will not work directly with the following diagonals:
- All William Optics diagonals
- Many other Meade, Celestron, Antares and other diagonals
- Any other non-GSO 2" eyepiece
There is no standardization in the astronomy industry for the threads used on diagonal/eyepiece bodies. Hence, do not assume that this adapter will work with your diagonal or eyepiece - in fact, if it is not GSO-made, it probably won't! Please check the thread on your diagonal/eyepiece body before ordering this item - we do not have compatibility information for all the diagonals/eyepieces out there.
Other Information
- Country of Manufacture: Taiwan
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
GSO 2" Smooth-Sided Barrel / Nosepiece from 2" GSO Refractor Diagonals & Eyepieces