Bob's Knobs for Meade 8" f/10 with 3-Screw Secondary
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: M8-3
Fits: Meade 8" (20 cm) f/10 SCT versions with three screws on the secondary housing (2080, LX5, LX10, LX50, LX90, LX100, LX200, others)
Knobs: Black plastic, 13 mm (1/2") diameter
Threads: Black anodized aluminum alloy
Notes:
- The factory dust cover may contact the knobs when installed. We provide a set of spacers that attach to the inside of the dust cover to move it slightly away from the secondary assembly. You can also press the center of the cover from the inside to contour it for additional clearance.
- Some post-2004 Meade 8" telescopes have four screws or six screws on the secondary housing. The 4-screw and 6-screw secondary require different knobs (Items M8-4 and M8-6) Do not use knobs for the 3-screw secondary on the 4-screw or 6-screw secondary. The screws on 3-screw knobs are too short.
- Some very early Meade 8" model 2080 telescopes have two collimation screws. Please contact us for knobs to fit this scope.
- An Allen wrench for removing the factory collimation screws is included with your order.
Other Information
- Country of Manufacture: United States
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: M8-3
Fits: Meade 8" (20 cm) f/10 SCT versions with three screws on the secondary housing (2080, LX5, LX10, LX50, LX90, LX100, LX200, others)
Knobs: Black plastic, 13 mm (1/2") diameter
Threads: Black anodized aluminum alloy
Notes:
- The factory dust cover may contact the knobs when installed. We provide a set of spacers that attach to the inside of the dust cover to move it slightly away from the secondary assembly. You can also press the center of the cover from the inside to contour it for additional clearance.
- Some post-2004 Meade 8" telescopes have four screws or six screws on the secondary housing. The 4-screw and 6-screw secondary require different knobs (Items M8-4 and M8-6) Do not use knobs for the 3-screw secondary on the 4-screw or 6-screw secondary. The screws on 3-screw knobs are too short.
- Some very early Meade 8" model 2080 telescopes have two collimation screws. Please contact us for knobs to fit this scope.
- An Allen wrench for removing the factory collimation screws is included with your order.
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: M8-3
Fits: Meade 8" (20 cm) f/10 SCT versions with three screws on the secondary housing (2080, LX5, LX10, LX50, LX90, LX100, LX200, others)
Knobs: Black plastic, 13 mm (1/2") diameter
Threads: Black anodized aluminum alloy
Notes:
- The factory dust cover may contact the knobs when installed. We provide a set of spacers that attach to the inside of the dust cover to move it slightly away from the secondary assembly. You can also press the center of the cover from the inside to contour it for additional clearance.
- Some post-2004 Meade 8" telescopes have four screws or six screws on the secondary housing. The 4-screw and 6-screw secondary require different knobs (Items M8-4 and M8-6) Do not use knobs for the 3-screw secondary on the 4-screw or 6-screw secondary. The screws on 3-screw knobs are too short.
- Some very early Meade 8" model 2080 telescopes have two collimation screws. Please contact us for knobs to fit this scope.
- An Allen wrench for removing the factory collimation screws is included with your order.
Other Information
- Country of Manufacture: United States
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Bob's Knobs for Meade 8" f/10 with 3-Screw Secondary