Baader SCT/T2 Universal Adapter for ETX / NX4 / C90 Mak/SCT Telescopes
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
Baader now makes the perfect complement to your Celestron NexStar4, Meade ETX , or C90* telescope. The Baader NX4-ETX Universal Adapter allows you to adapt various photo-visual accessories that use either T-thread or standard 2" SCT thread to these telescopes.
This adapter actually consists of two different parts that can be used individually or together (see photo 2). The first adapter (A) has a female 1.375"x24TPI (almost 35mm) thread on one side to attach to your telescope. The other side has a standard male SCT thread (2"x24TPI). If you use only this adapter, you can attach standard SCT threaded accessories meant for larger SCT scopes to your telescope.
The second adapter (B) has a female SCT thread on one side and a standard male T / T2 thread on the other side. Obviously, this adapter cannot be used by itself on NX4/ETX/C90 scopes, but when coupled with Adapter A (see photo 1), it converts the NX4/ETX male thread on your scope to a T thread for attachment of various T threaded accessories and camera/imaging equipment. The T thread ring is fully rotatable, allowing you to orient/rotate any accessories attached to it.
Adapter A also incorporates an internal 1.25" female filter thread which allows you to install any 1.25" filter inside the adapter. This allows you to direct couple any accessory and still be able to incorporate photo or visual filters in the optical path. Or install a clear UV/IR cut filter to completely seal your telescope from dust and the elements. 1.25" filters can be attached in this manner whether you use Adapter A by itself or in combination with Adapter B.
Both adapter rings (A and B) feature wide fluted surfaces to enable a better grip for secure locking. Adapter A has a total length of 17.5mm and weighs 1.8oz. Adapter B has a total length of 20mm and weighs 0.9oz. The combination (A+B) has a total length of 30.5mm and weighs 2.7oz.
*Important Note: The Meade ETX and Celestron Nexstar telescopes feature a 1.375"x24TPI male thread on the rear of the scope. Many - BUT NOT ALL - older Celestron C90 spotting scopes also feature this thread. It is your responsibility to check the thread on your scope to make sure that this item will work with it. We cannot be responsible for any fit issues if your scope does not have the NX4/ETX thread specified on this adapter.
Other Information
- Country of Manufacture: China
Baader now makes the perfect complement to your Celestron NexStar4, Meade ETX , or C90* telescope. The Baader NX4-ETX Universal Adapter allows you to adapt various photo-visual accessories that use either T-thread or standard 2" SCT thread to these telescopes.
This adapter actually consists of two different parts that can be used individually or together (see photo 2). The first adapter (A) has a female 1.375"x24TPI (almost 35mm) thread on one side to attach to your telescope. The other side has a standard male SCT thread (2"x24TPI). If you use only this adapter, you can attach standard SCT threaded accessories meant for larger SCT scopes to your telescope.
The second adapter (B) has a female SCT thread on one side and a standard male T / T2 thread on the other side. Obviously, this adapter cannot be used by itself on NX4/ETX/C90 scopes, but when coupled with Adapter A (see photo 1), it converts the NX4/ETX male thread on your scope to a T thread for attachment of various T threaded accessories and camera/imaging equipment. The T thread ring is fully rotatable, allowing you to orient/rotate any accessories attached to it.
Adapter A also incorporates an internal 1.25" female filter thread which allows you to install any 1.25" filter inside the adapter. This allows you to direct couple any accessory and still be able to incorporate photo or visual filters in the optical path. Or install a clear UV/IR cut filter to completely seal your telescope from dust and the elements. 1.25" filters can be attached in this manner whether you use Adapter A by itself or in combination with Adapter B.
Both adapter rings (A and B) feature wide fluted surfaces to enable a better grip for secure locking. Adapter A has a total length of 17.5mm and weighs 1.8oz. Adapter B has a total length of 20mm and weighs 0.9oz. The combination (A+B) has a total length of 30.5mm and weighs 2.7oz.
*Important Note: The Meade ETX and Celestron Nexstar telescopes feature a 1.375"x24TPI male thread on the rear of the scope. Many - BUT NOT ALL - older Celestron C90 spotting scopes also feature this thread. It is your responsibility to check the thread on your scope to make sure that this item will work with it. We cannot be responsible for any fit issues if your scope does not have the NX4/ETX thread specified on this adapter.
Baader now makes the perfect complement to your Celestron NexStar4, Meade ETX , or C90* telescope. The Baader NX4-ETX Universal Adapter allows you to adapt various photo-visual accessories that use either T-thread or standard 2" SCT thread to these telescopes.
This adapter actually consists of two different parts that can be used individually or together (see photo 2). The first adapter (A) has a female 1.375"x24TPI (almost 35mm) thread on one side to attach to your telescope. The other side has a standard male SCT thread (2"x24TPI). If you use only this adapter, you can attach standard SCT threaded accessories meant for larger SCT scopes to your telescope.
The second adapter (B) has a female SCT thread on one side and a standard male T / T2 thread on the other side. Obviously, this adapter cannot be used by itself on NX4/ETX/C90 scopes, but when coupled with Adapter A (see photo 1), it converts the NX4/ETX male thread on your scope to a T thread for attachment of various T threaded accessories and camera/imaging equipment. The T thread ring is fully rotatable, allowing you to orient/rotate any accessories attached to it.
Adapter A also incorporates an internal 1.25" female filter thread which allows you to install any 1.25" filter inside the adapter. This allows you to direct couple any accessory and still be able to incorporate photo or visual filters in the optical path. Or install a clear UV/IR cut filter to completely seal your telescope from dust and the elements. 1.25" filters can be attached in this manner whether you use Adapter A by itself or in combination with Adapter B.
Both adapter rings (A and B) feature wide fluted surfaces to enable a better grip for secure locking. Adapter A has a total length of 17.5mm and weighs 1.8oz. Adapter B has a total length of 20mm and weighs 0.9oz. The combination (A+B) has a total length of 30.5mm and weighs 2.7oz.
*Important Note: The Meade ETX and Celestron Nexstar telescopes feature a 1.375"x24TPI male thread on the rear of the scope. Many - BUT NOT ALL - older Celestron C90 spotting scopes also feature this thread. It is your responsibility to check the thread on your scope to make sure that this item will work with it. We cannot be responsible for any fit issues if your scope does not have the NX4/ETX thread specified on this adapter.
Other Information
- Country of Manufacture: China
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Baader SCT/T2 Universal Adapter for ETX / NX4 / C90 Mak/SCT Telescopes