Astronomik OWB Type 3 Filter - Nikon XL Clip Filter
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.
DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.
The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter.
Suitability of the Astronomik OWB Type 3 filters
- DSLR photography (astro-modified): Very good, restores standard white balance for regular photography
- DSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography
Clip-Filter for Nikon full-frame DSLR cameras
Since 2007 we offer our extremely popular Astronomik Clip-Filters. The complete range of Astronomik filters is available as Clip-Filters for Nikon’s full-frame DSLR cameras.
The Astronomik Clip-Filters offer a number of practical advantages that make them an ideal choice for astrophotographers:
- Installing and removing the Astronomik Clip-Filter is very quick and easy and requires no extra tools or modifications to the camera body. They can be changed at any time, even at night.
- All lens functions, such as focus, aperture, and image stabilization remain fully functional.
- The Astronomik Clip-Filters are held securely in place without stressing the high-quality glass.
- The Astronomik Clip-Filters are designed and optimized for use with both standard camera lenses and telescopes.
Through the Astronomik Clip-Filters, we were able to solve several common issues faced by astrophotographers:
- Large filters for large camera lenses are very expensive.
- Using a filter holder between the camera body and the lens prevents focusing to infinity.
- For very fast telescopes (low f-number) like the Vixen R200SS or the Takahashi "Epsilon" astrograph, a filter drawer or filter wheel can not be used because the distance to the corrector lenses would be changed.
- Long exposure times lead to dust settling on the camera's sensor chip.
Due to the very tight bayonet and the limited space inside the camera, the Astronomik Nikon XL Clip-Filters cause a minimal obstruction in the corners. But this can be easily corrected by flatfielding.
Use Astronomik filters for your Nikon full-frame DSLR camera and enjoy marvelous images with an ultra light equipment!
Compatible Nikon full-frame DSLR cameras
| Model | Compatibility |
|---|---|
| Nikon D750 | Yes |
| Nikon D780 | Limited* |
| Nikon D800 | Yes |
| Nikon D810 | Yes |
| Nikon D850 | Limited* |
* After a recent firmware update, Astronomik Nikon XL Clip-Filters can no longer be used with the Nikon D780 and D850 bodies. For these bodies, you can only use manual focus lenses or a T-adapter (with a telescope). Using lenses with electronic contacts will result in an error message, preventing the camera from functioning.
Workaround: To use lenses with electronic contacts on the D780 and D850 with the Astronomik Nikon XL Clip-Filter installed, you can apply tape over the lens contacts. This will prevent the error message, allowing the camera to work normally.
Technical Data
- Glass thickness: 0,5mm
- Finely polished optical glass, free of any striae, residual stresses, and bubbles
- Extremely scratch-resistant and durable coating
- Completely resistant against high humidity and aging effects
- Parfocal with other Astronomik filters
- Diffraction-limited
- Optimized spectral windows
- Delivered in a high-quality, long-lasting filter box
Due to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated.
All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.
Every Astronomik filter undergoes a rigorous quality control process before delivery.
Other Information
- Country of Manufacture: Germany
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.
DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.
The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter.
Suitability of the Astronomik OWB Type 3 filters
- DSLR photography (astro-modified): Very good, restores standard white balance for regular photography
- DSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography
Clip-Filter for Nikon full-frame DSLR cameras
Since 2007 we offer our extremely popular Astronomik Clip-Filters. The complete range of Astronomik filters is available as Clip-Filters for Nikon’s full-frame DSLR cameras.
The Astronomik Clip-Filters offer a number of practical advantages that make them an ideal choice for astrophotographers:
- Installing and removing the Astronomik Clip-Filter is very quick and easy and requires no extra tools or modifications to the camera body. They can be changed at any time, even at night.
- All lens functions, such as focus, aperture, and image stabilization remain fully functional.
- The Astronomik Clip-Filters are held securely in place without stressing the high-quality glass.
- The Astronomik Clip-Filters are designed and optimized for use with both standard camera lenses and telescopes.
Through the Astronomik Clip-Filters, we were able to solve several common issues faced by astrophotographers:
- Large filters for large camera lenses are very expensive.
- Using a filter holder between the camera body and the lens prevents focusing to infinity.
- For very fast telescopes (low f-number) like the Vixen R200SS or the Takahashi "Epsilon" astrograph, a filter drawer or filter wheel can not be used because the distance to the corrector lenses would be changed.
- Long exposure times lead to dust settling on the camera's sensor chip.
Due to the very tight bayonet and the limited space inside the camera, the Astronomik Nikon XL Clip-Filters cause a minimal obstruction in the corners. But this can be easily corrected by flatfielding.
Use Astronomik filters for your Nikon full-frame DSLR camera and enjoy marvelous images with an ultra light equipment!
Compatible Nikon full-frame DSLR cameras
| Model | Compatibility |
|---|---|
| Nikon D750 | Yes |
| Nikon D780 | Limited* |
| Nikon D800 | Yes |
| Nikon D810 | Yes |
| Nikon D850 | Limited* |
* After a recent firmware update, Astronomik Nikon XL Clip-Filters can no longer be used with the Nikon D780 and D850 bodies. For these bodies, you can only use manual focus lenses or a T-adapter (with a telescope). Using lenses with electronic contacts will result in an error message, preventing the camera from functioning.
Workaround: To use lenses with electronic contacts on the D780 and D850 with the Astronomik Nikon XL Clip-Filter installed, you can apply tape over the lens contacts. This will prevent the error message, allowing the camera to work normally.
Technical Data
- Glass thickness: 0,5mm
- Finely polished optical glass, free of any striae, residual stresses, and bubbles
- Extremely scratch-resistant and durable coating
- Completely resistant against high humidity and aging effects
- Parfocal with other Astronomik filters
- Diffraction-limited
- Optimized spectral windows
- Delivered in a high-quality, long-lasting filter box
Due to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated.
All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.
Every Astronomik filter undergoes a rigorous quality control process before delivery.
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.
DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.
The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter.
Suitability of the Astronomik OWB Type 3 filters
- DSLR photography (astro-modified): Very good, restores standard white balance for regular photography
- DSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography
Clip-Filter for Nikon full-frame DSLR cameras
Since 2007 we offer our extremely popular Astronomik Clip-Filters. The complete range of Astronomik filters is available as Clip-Filters for Nikon’s full-frame DSLR cameras.
The Astronomik Clip-Filters offer a number of practical advantages that make them an ideal choice for astrophotographers:
- Installing and removing the Astronomik Clip-Filter is very quick and easy and requires no extra tools or modifications to the camera body. They can be changed at any time, even at night.
- All lens functions, such as focus, aperture, and image stabilization remain fully functional.
- The Astronomik Clip-Filters are held securely in place without stressing the high-quality glass.
- The Astronomik Clip-Filters are designed and optimized for use with both standard camera lenses and telescopes.
Through the Astronomik Clip-Filters, we were able to solve several common issues faced by astrophotographers:
- Large filters for large camera lenses are very expensive.
- Using a filter holder between the camera body and the lens prevents focusing to infinity.
- For very fast telescopes (low f-number) like the Vixen R200SS or the Takahashi "Epsilon" astrograph, a filter drawer or filter wheel can not be used because the distance to the corrector lenses would be changed.
- Long exposure times lead to dust settling on the camera's sensor chip.
Due to the very tight bayonet and the limited space inside the camera, the Astronomik Nikon XL Clip-Filters cause a minimal obstruction in the corners. But this can be easily corrected by flatfielding.
Use Astronomik filters for your Nikon full-frame DSLR camera and enjoy marvelous images with an ultra light equipment!
Compatible Nikon full-frame DSLR cameras
| Model | Compatibility |
|---|---|
| Nikon D750 | Yes |
| Nikon D780 | Limited* |
| Nikon D800 | Yes |
| Nikon D810 | Yes |
| Nikon D850 | Limited* |
* After a recent firmware update, Astronomik Nikon XL Clip-Filters can no longer be used with the Nikon D780 and D850 bodies. For these bodies, you can only use manual focus lenses or a T-adapter (with a telescope). Using lenses with electronic contacts will result in an error message, preventing the camera from functioning.
Workaround: To use lenses with electronic contacts on the D780 and D850 with the Astronomik Nikon XL Clip-Filter installed, you can apply tape over the lens contacts. This will prevent the error message, allowing the camera to work normally.
Technical Data
- Glass thickness: 0,5mm
- Finely polished optical glass, free of any striae, residual stresses, and bubbles
- Extremely scratch-resistant and durable coating
- Completely resistant against high humidity and aging effects
- Parfocal with other Astronomik filters
- Diffraction-limited
- Optimized spectral windows
- Delivered in a high-quality, long-lasting filter box
Due to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated.
All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.
Every Astronomik filter undergoes a rigorous quality control process before delivery.
Other Information
- Country of Manufacture: Germany
| Product Status | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Astronomik OWB Type 3 Filter - Nikon XL Clip Filter