Astrodevice 'The Box' Filter Sliders Storage Container
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
Please note that this is a 3d printed plastic part.
Astrodevice filter sliders storage container # THE-BOX
With it, you can store your filters always ready to slide into your filter drawer. No longer will you have to worry about screwing your filter in and out of the slider or searching for the right filter in the clutter of equipment. Your filters will be able to be screwed into their own sliders, organized, properly labeled and protected from the external environment.
The container holds 6 sliders, including 5 under the lid and one on the outside. The accessory is also equipped with a pocket for storing a magnetic key along with a lanyard. The bottom part of the interior is lined with shock-absorbing foam. The set includes 15 engraved plaques: 10 of them contain the names of popular filters, 1 is for Blind Filter and 4 masking plates do not contain any inscription.
The standard filter names in the kit are: H-alpha, O-III, S-II, Red, Green, Blue, UV/IR Cut, Multiband, CLS and UHC
For filter drawer models:
- FD 900 M87
- FD 900 M42
- FD 860 M87
- FD 860 M42
If you have one of Astrodevice’s filter drawers, you surely know that filters feel best when they are screwed into the magnetic sliders. Then you can easily reach for them and put them in the drawer whenever you need to. You don’t screw them in in the dark, but simply have a pre-prepared set of filters in the sliders.
To make it even more convenient for drawer users, Astrodevice created The Box – a fantastic storage container for storing sliders with screw-in filters.
But it’s not just a box. It’s a well-thought-out design full of amenities for maximum convenience of use.
Let’s start with the interior. The container contains five compartments into which filter sliders can be inserted. In fact, you can even throw them in there, because the bottom is lined with soft foam to absorb shocks. This is especially useful in the dark, when it’s hard to force yourself to be very precise. Then you simply slide the slider into the compartment and it will take care of itself, making it soft, comfortable and landing without any shocks.
The outside is also interesting. On the sides there are two special compartments. In the wider one you will place the magnetic key. It will lie there during the day together with the Astrodevice lanyard, waiting quietly for the next photo session. It won’t get hidden anywhere. On the other side, in turn, you will find a slightly narrower compartment. This is yet another space for the slider. This time, however, it’s an uncovered space where you can place the filter you’re just about to replace. During a photo session, when it comes to changing a filter, the last thing you want to do is not only screw in new filters, but also open the box and look for the right one. When the time comes, you just want to reload. That’s why you can put another slider in this special pocket to quickly reach for it at the right time. The rest of the sliders, meanwhile, will lie quietly covered.
Now look at the top – even the lid is special here. It not only protects the glass from outside dust and insects, but also allows you to easily identify the filters. This is because there are special indentations in the top where you can mount engraved plaques with appropriate signatures:
|
|
|
|
In total, you will find 15 plaques in the set, from which you can arrange almost any collection. What’s more, if you need an inscription that isn’t included in the set, you can simply custom order it.
When you look at The Box from a perspective, you will notice that its form resembles a modernist building, following the architectural tradition in which form is determined by function and construction is dictated by material considerations. Here the material is carbon fiber doped plastic, engraved acrylic, flexible additives and metal fasteners. The whole thing – like all Astrodevice accessories – is produced in one-off pieces and hand-assembled for the best quality.
The base of the product are 3D printed elements made of PET-G CF filament (polyethylene terephthalate glycol-modified reinforced with carbon fiber).
Other Information
- Country of Manufacture: Poland
Please note that this is a 3d printed plastic part.
Astrodevice filter sliders storage container # THE-BOX
With it, you can store your filters always ready to slide into your filter drawer. No longer will you have to worry about screwing your filter in and out of the slider or searching for the right filter in the clutter of equipment. Your filters will be able to be screwed into their own sliders, organized, properly labeled and protected from the external environment.
The container holds 6 sliders, including 5 under the lid and one on the outside. The accessory is also equipped with a pocket for storing a magnetic key along with a lanyard. The bottom part of the interior is lined with shock-absorbing foam. The set includes 15 engraved plaques: 10 of them contain the names of popular filters, 1 is for Blind Filter and 4 masking plates do not contain any inscription.
The standard filter names in the kit are: H-alpha, O-III, S-II, Red, Green, Blue, UV/IR Cut, Multiband, CLS and UHC
For filter drawer models:
- FD 900 M87
- FD 900 M42
- FD 860 M87
- FD 860 M42
If you have one of Astrodevice’s filter drawers, you surely know that filters feel best when they are screwed into the magnetic sliders. Then you can easily reach for them and put them in the drawer whenever you need to. You don’t screw them in in the dark, but simply have a pre-prepared set of filters in the sliders.
To make it even more convenient for drawer users, Astrodevice created The Box – a fantastic storage container for storing sliders with screw-in filters.
But it’s not just a box. It’s a well-thought-out design full of amenities for maximum convenience of use.
Let’s start with the interior. The container contains five compartments into which filter sliders can be inserted. In fact, you can even throw them in there, because the bottom is lined with soft foam to absorb shocks. This is especially useful in the dark, when it’s hard to force yourself to be very precise. Then you simply slide the slider into the compartment and it will take care of itself, making it soft, comfortable and landing without any shocks.
The outside is also interesting. On the sides there are two special compartments. In the wider one you will place the magnetic key. It will lie there during the day together with the Astrodevice lanyard, waiting quietly for the next photo session. It won’t get hidden anywhere. On the other side, in turn, you will find a slightly narrower compartment. This is yet another space for the slider. This time, however, it’s an uncovered space where you can place the filter you’re just about to replace. During a photo session, when it comes to changing a filter, the last thing you want to do is not only screw in new filters, but also open the box and look for the right one. When the time comes, you just want to reload. That’s why you can put another slider in this special pocket to quickly reach for it at the right time. The rest of the sliders, meanwhile, will lie quietly covered.
Now look at the top – even the lid is special here. It not only protects the glass from outside dust and insects, but also allows you to easily identify the filters. This is because there are special indentations in the top where you can mount engraved plaques with appropriate signatures:
|
|
|
|
In total, you will find 15 plaques in the set, from which you can arrange almost any collection. What’s more, if you need an inscription that isn’t included in the set, you can simply custom order it.
When you look at The Box from a perspective, you will notice that its form resembles a modernist building, following the architectural tradition in which form is determined by function and construction is dictated by material considerations. Here the material is carbon fiber doped plastic, engraved acrylic, flexible additives and metal fasteners. The whole thing – like all Astrodevice accessories – is produced in one-off pieces and hand-assembled for the best quality.
The base of the product are 3D printed elements made of PET-G CF filament (polyethylene terephthalate glycol-modified reinforced with carbon fiber).
Please note that this is a 3d printed plastic part.
Astrodevice filter sliders storage container # THE-BOX
With it, you can store your filters always ready to slide into your filter drawer. No longer will you have to worry about screwing your filter in and out of the slider or searching for the right filter in the clutter of equipment. Your filters will be able to be screwed into their own sliders, organized, properly labeled and protected from the external environment.
The container holds 6 sliders, including 5 under the lid and one on the outside. The accessory is also equipped with a pocket for storing a magnetic key along with a lanyard. The bottom part of the interior is lined with shock-absorbing foam. The set includes 15 engraved plaques: 10 of them contain the names of popular filters, 1 is for Blind Filter and 4 masking plates do not contain any inscription.
The standard filter names in the kit are: H-alpha, O-III, S-II, Red, Green, Blue, UV/IR Cut, Multiband, CLS and UHC
For filter drawer models:
- FD 900 M87
- FD 900 M42
- FD 860 M87
- FD 860 M42
If you have one of Astrodevice’s filter drawers, you surely know that filters feel best when they are screwed into the magnetic sliders. Then you can easily reach for them and put them in the drawer whenever you need to. You don’t screw them in in the dark, but simply have a pre-prepared set of filters in the sliders.
To make it even more convenient for drawer users, Astrodevice created The Box – a fantastic storage container for storing sliders with screw-in filters.
But it’s not just a box. It’s a well-thought-out design full of amenities for maximum convenience of use.
Let’s start with the interior. The container contains five compartments into which filter sliders can be inserted. In fact, you can even throw them in there, because the bottom is lined with soft foam to absorb shocks. This is especially useful in the dark, when it’s hard to force yourself to be very precise. Then you simply slide the slider into the compartment and it will take care of itself, making it soft, comfortable and landing without any shocks.
The outside is also interesting. On the sides there are two special compartments. In the wider one you will place the magnetic key. It will lie there during the day together with the Astrodevice lanyard, waiting quietly for the next photo session. It won’t get hidden anywhere. On the other side, in turn, you will find a slightly narrower compartment. This is yet another space for the slider. This time, however, it’s an uncovered space where you can place the filter you’re just about to replace. During a photo session, when it comes to changing a filter, the last thing you want to do is not only screw in new filters, but also open the box and look for the right one. When the time comes, you just want to reload. That’s why you can put another slider in this special pocket to quickly reach for it at the right time. The rest of the sliders, meanwhile, will lie quietly covered.
Now look at the top – even the lid is special here. It not only protects the glass from outside dust and insects, but also allows you to easily identify the filters. This is because there are special indentations in the top where you can mount engraved plaques with appropriate signatures:
|
|
|
|
In total, you will find 15 plaques in the set, from which you can arrange almost any collection. What’s more, if you need an inscription that isn’t included in the set, you can simply custom order it.
When you look at The Box from a perspective, you will notice that its form resembles a modernist building, following the architectural tradition in which form is determined by function and construction is dictated by material considerations. Here the material is carbon fiber doped plastic, engraved acrylic, flexible additives and metal fasteners. The whole thing – like all Astrodevice accessories – is produced in one-off pieces and hand-assembled for the best quality.
The base of the product are 3D printed elements made of PET-G CF filament (polyethylene terephthalate glycol-modified reinforced with carbon fiber).
Other Information
- Country of Manufacture: Poland
| Product Status | sale |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Astrodevice 'The Box' Filter Sliders Storage Container