Agena 1.25" 5-Position Manual Filter Wheel with 5 Filters
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
- This item is out of stock.
- We have no ETA from the manufacturer at this time.
- Sign up for back-in-stock alerts to be notified when this item becomes available.
Lower 48 States:
Orders over $50 ship free within the Lower 48 using a carrier and service we select based on your items and delivery location. Faster shipping options may be available at checkout.
U.S. Outside the Lower 48 (AK, HI, PR):
Free shipping on orders over $50 applies to many—but not all—items. Add items to your cart and enter your ZIP code to see available shipping options and any costs.
International Orders:
Free shipping does not apply to international orders. You’ll see available shipping options and costs during checkout. Some items can’t be shipped internationally due to size or manufacturer restrictions. Duties, taxes, brokerage fees, and tariffs are not included and are the customer’s responsibility.
- Five position manual operation
- Threaded for standard 1.25" astronomy filters
- Smooth rotational pressure minimizes "scope shake" and image shift
- Positive click stops for each position ensure precise alignment of the filter
- Thumbscrews provide easy, tool-free access to the wheel for installation and removal of filters
- Multiple adapters provided for flexibility
- A knurled locking ring allows the imaging device to be rotated so it can be oriented to the optimum position
- Rugged anodized aluminum and composite rubber housing protects installed filters from dirt, moisture, and impact
- Light weight (10 oz.) to provide flexure-free imaging with most focusers
- Requires an additional 25mm or 53mm of back focus depending on use
Astrophotographers and visual observers alike will benefit from the addition of an affordable, high quality filter wheel to their telescope setup.
The Agena 5-Piece Filter Wheel INCLUDES five 1.25″ imaging filters – red (25), green (56), yellow (12), blue (80A), and a ND96 0.3 (50% transmission neutral density), or you can leave one position empty for unfiltered viewing.
The filter wheel is attached directly to your telescope's focuser - via the removable 1.25" nose piece – making filter changes fast and easy. Thumbscrews are provided for fast, tool-free removal and installation of filters. Positive click stops for each position ensure the filter is placed precisely in the telescope's light path.
Visual observers can attach the included 1.25" eyepiece adapter to the filter wheel and install their star diagonal to hold an eyepiece as usual. No more removing the eyepiece, unscrewing the filter, screwing on a different filter, and placing the eyepiece back into the star diagonal. A simple turn of the wheel to the desired filter is all it takes. Up to five filters can be installed.
Astrophotographers can remove the included filters and install their 1.25" LRGB filter set, and then attach the imaging device to the provided T-thread camera adapter. You’re then able to quickly move the wheel to each filter in succession for the required exposures - with minimal interruption. There is no need to remove the imaging device from the focuser, virtually eliminating image shift. A knurled locking ring ensures the imaging device is securely attached to the T adapter in any orientation desired. The nominal 20mm back focus requirement is within the capability of most modern focusers The filter wheel's versatility allows you to easily and quickly configure the filter positions to best suit your needs.
The lightweight aluminum housing protects installed filters from dirt, moisture, and impact better than other designs on the market. When removed from the telescope, two provided plastic dust caps continue to keep your filters free of dust and smudges while in storage.
Included in the box:
- 5-position 1.25" filter wheel
- Five 1.25” filters - red (25), green (56), yellow (12), blue (80A), and ND96 0.3 (50% transmission)
- Removable male 42mm T-thread camera adapter
- Removable 1.25" eyepiece holder
- Removable 1.25" nosepiece
- Locking ring for the T-thread camera/imaging device adapter
Additional Specifications:
- Filter Capacity: Five standard 1.25" astronomical filters
- Operation: Manual with positive clickstops
- Nose Piece: 1.25" (31.7mm)
- Camera Adapter: Standard male T-thread
- Eyepiece Adapter: 1.25" (31.7mm)
- Filter Threads: Standard 1.25" female filter thread (M28.5 x 0.6)
- Backfocus Requirement: 25mm in photo mode; 53mm in visual mode using included 1.25" eyepiece holder
- Included Filters: Yes - red (25), green (56), yellow (12), blue (80A), and ND96 0.3 (50% transmission)
- Dust Caps: 2
- Weight: 10 oz (0.28 kg) without filters
Other Information
- Country of Manufacture: China
Astrophotographers and visual observers alike will benefit from the addition of an affordable, high quality filter wheel to their telescope setup.
The Agena 5-Piece Filter Wheel INCLUDES five 1.25″ imaging filters – red (25), green (56), yellow (12), blue (80A), and a ND96 0.3 (50% transmission neutral density), or you can leave one position empty for unfiltered viewing.
The filter wheel is attached directly to your telescope's focuser - via the removable 1.25" nose piece – making filter changes fast and easy. Thumbscrews are provided for fast, tool-free removal and installation of filters. Positive click stops for each position ensure the filter is placed precisely in the telescope's light path.
Visual observers can attach the included 1.25" eyepiece adapter to the filter wheel and install their star diagonal to hold an eyepiece as usual. No more removing the eyepiece, unscrewing the filter, screwing on a different filter, and placing the eyepiece back into the star diagonal. A simple turn of the wheel to the desired filter is all it takes. Up to five filters can be installed.
Astrophotographers can remove the included filters and install their 1.25" LRGB filter set, and then attach the imaging device to the provided T-thread camera adapter. You’re then able to quickly move the wheel to each filter in succession for the required exposures - with minimal interruption. There is no need to remove the imaging device from the focuser, virtually eliminating image shift. A knurled locking ring ensures the imaging device is securely attached to the T adapter in any orientation desired. The nominal 20mm back focus requirement is within the capability of most modern focusers The filter wheel's versatility allows you to easily and quickly configure the filter positions to best suit your needs.
The lightweight aluminum housing protects installed filters from dirt, moisture, and impact better than other designs on the market. When removed from the telescope, two provided plastic dust caps continue to keep your filters free of dust and smudges while in storage.
Included in the box:
- 5-position 1.25" filter wheel
- Five 1.25” filters - red (25), green (56), yellow (12), blue (80A), and ND96 0.3 (50% transmission)
- Removable male 42mm T-thread camera adapter
- Removable 1.25" eyepiece holder
- Removable 1.25" nosepiece
- Locking ring for the T-thread camera/imaging device adapter
Additional Specifications:
- Filter Capacity: Five standard 1.25" astronomical filters
- Operation: Manual with positive clickstops
- Nose Piece: 1.25" (31.7mm)
- Camera Adapter: Standard male T-thread
- Eyepiece Adapter: 1.25" (31.7mm)
- Filter Threads: Standard 1.25" female filter thread (M28.5 x 0.6)
- Backfocus Requirement: 25mm in photo mode; 53mm in visual mode using included 1.25" eyepiece holder
- Included Filters: Yes - red (25), green (56), yellow (12), blue (80A), and ND96 0.3 (50% transmission)
- Dust Caps: 2
- Weight: 10 oz (0.28 kg) without filters
- Five position manual operation
- Threaded for standard 1.25" astronomy filters
- Smooth rotational pressure minimizes "scope shake" and image shift
- Positive click stops for each position ensure precise alignment of the filter
- Thumbscrews provide easy, tool-free access to the wheel for installation and removal of filters
- Multiple adapters provided for flexibility
- A knurled locking ring allows the imaging device to be rotated so it can be oriented to the optimum position
- Rugged anodized aluminum and composite rubber housing protects installed filters from dirt, moisture, and impact
- Light weight (10 oz.) to provide flexure-free imaging with most focusers
- Requires an additional 25mm or 53mm of back focus depending on use
Astrophotographers and visual observers alike will benefit from the addition of an affordable, high quality filter wheel to their telescope setup.
The Agena 5-Piece Filter Wheel INCLUDES five 1.25″ imaging filters – red (25), green (56), yellow (12), blue (80A), and a ND96 0.3 (50% transmission neutral density), or you can leave one position empty for unfiltered viewing.
The filter wheel is attached directly to your telescope's focuser - via the removable 1.25" nose piece – making filter changes fast and easy. Thumbscrews are provided for fast, tool-free removal and installation of filters. Positive click stops for each position ensure the filter is placed precisely in the telescope's light path.
Visual observers can attach the included 1.25" eyepiece adapter to the filter wheel and install their star diagonal to hold an eyepiece as usual. No more removing the eyepiece, unscrewing the filter, screwing on a different filter, and placing the eyepiece back into the star diagonal. A simple turn of the wheel to the desired filter is all it takes. Up to five filters can be installed.
Astrophotographers can remove the included filters and install their 1.25" LRGB filter set, and then attach the imaging device to the provided T-thread camera adapter. You’re then able to quickly move the wheel to each filter in succession for the required exposures - with minimal interruption. There is no need to remove the imaging device from the focuser, virtually eliminating image shift. A knurled locking ring ensures the imaging device is securely attached to the T adapter in any orientation desired. The nominal 20mm back focus requirement is within the capability of most modern focusers The filter wheel's versatility allows you to easily and quickly configure the filter positions to best suit your needs.
The lightweight aluminum housing protects installed filters from dirt, moisture, and impact better than other designs on the market. When removed from the telescope, two provided plastic dust caps continue to keep your filters free of dust and smudges while in storage.
Included in the box:
- 5-position 1.25" filter wheel
- Five 1.25” filters - red (25), green (56), yellow (12), blue (80A), and ND96 0.3 (50% transmission)
- Removable male 42mm T-thread camera adapter
- Removable 1.25" eyepiece holder
- Removable 1.25" nosepiece
- Locking ring for the T-thread camera/imaging device adapter
Additional Specifications:
- Filter Capacity: Five standard 1.25" astronomical filters
- Operation: Manual with positive clickstops
- Nose Piece: 1.25" (31.7mm)
- Camera Adapter: Standard male T-thread
- Eyepiece Adapter: 1.25" (31.7mm)
- Filter Threads: Standard 1.25" female filter thread (M28.5 x 0.6)
- Backfocus Requirement: 25mm in photo mode; 53mm in visual mode using included 1.25" eyepiece holder
- Included Filters: Yes - red (25), green (56), yellow (12), blue (80A), and ND96 0.3 (50% transmission)
- Dust Caps: 2
- Weight: 10 oz (0.28 kg) without filters
Other Information
- Country of Manufacture: China
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |